Custom-cut SeaDek marine flooring, installed by hand wherever your boat lives — at the marina, on a dry dock, or in your driveway. Non-slip in any weather, easy on bare feet, and built to outlast the next refit. From Collingwood and Meaford to Parry Sound, Barrie, Orillia, and Muskoka.
Cut and bonded by hand on your boat — at the marina, the dry dock, or your driveway. No shortcuts, no seam guesswork, no thin spots where the foot lands.
The short version. The long version happens in your boat, on the cradle, on a Tuesday in April.
Non-slip, skid-resistant decking built to weather the harshest climates. Steady traction for you and your family, year-round — wet, dry, cold, hot.
See it on a Yamaha
High-performance marine foam applied almost anywhere on a boat. Pick your colour, your thickness, your routing pattern. We line up patterns across seams.
See it on a Carver
An original design that speaks to your boat. Logos, name plates, custom routing, triple-lamination edges — finished work that looks like it left the factory that way.
See it on a Cruisers Yachts
Built for Ontario winters. Cushion underfoot, cooler than gel-coat in the sun, warmer than carpet in the shoulder season. Lasts a decade plus.
See it on a JeffersonOn boats up and down the shore — Collingwood, Meaford, Midland, Penetanguishene, Parry Sound, Barrie, Innisfil, Orillia, Beaverton, and across Muskoka. You will spot the work before you read the boat's name.
Volume work on marina-stored boats — cradle to launch. Pattern alignment across seams, edged with intent, finished while the boat is on the hard so you walk back to it ready for the water.
Start a quote like this Interior flooring, swim platforms, helm pads — cut and bonded by hand on your boat, wherever it sits. The work shows up in person; consistency of the cut, alignment and edge is the actual sales pitch.
Start a quote like this 
We install at the marina, on a dry dock, or in your driveway — wherever your boat lives. On-cradle windows worked out with the yard, no truck-and-trailer hassle, no waiting for a slot in someone else's shop. Your boat doesn't move.
Affiliated with Thomas Custom Marine — the workshop, the reputation, the marine fabricator network of an established shop. Not a guy with a knife and a glue roller.
Walk past your boat at the dock, then a friend's, then a demo unit. The consistency of the cut quality, pattern alignment and edge work is the actual sales pitch. We line up patterns across seams.
On-record reviews from boat owners we have worked with. We don't farm reviews — these came from the work.
"Kal was just great to work with. His attention to detail is incredible. Amazing work!!!"
"What an amazing product… it has made boating even more safe with the non-slip properties of SeaDek. Thanks Kal and SeaDek!!!"
"Coming up — Kal's next install."
The ones we get most often. If yours isn't here, call Kal at 705 716-1223 or start a quote and ask in the form.
Most installs land between $1,500 and $8,000 depending on coverage area, custom routing, and artwork. A swim platform on a smaller boat runs $1,500–$3,000. A full cockpit + helm pads on a 30–50ft cruiser is closer to $4,000–$8,000. Custom inlays, logos, and full-sheet laser patterning add to the range. Every quote is built around your boat — fill in the form at the top of the page and Kal calls back within one business day with honest options and a real number.
A swim-platform install typically takes 4–6 hours on the boat. A full cockpit + helm pads is a one- to two-day job. We work on a cradle when the yard schedule allows, or in the slip if your marina permits it. Most jobs are scheduled in a single window so your boat doesn't sit half-done — we show up, prep, cut, bond, and finish the edges in one visit.
No. SeaDek uses an acrylic-based pressure-sensitive adhesive (PSA) — the same family of adhesive used on automotive trim. It bonds firmly when installed correctly but can be removed without damaging the underlying gel coat or paint. We surface-prep with isopropyl alcohol before bonding and run the adhesive at full pressure to avoid bubbles or edge lift.
SeaDek sells DIY kits and many owners do install them. Where pro installation pays off is on custom-cut work — pattern alignment across seams, triple-lamination edges, custom routing, and inlaid logos. Hand-cut, on-boat installs also avoid the trial-and-error fit issues common with pre-cut kits. If your install is straightforward (swim pad on a smaller boat, no custom shapes), a DIY kit may suit you. For full-cockpit work or anything with custom patterning, we'll save you the headache and the second attempt.
Properly installed SeaDek lasts 10+ years on most boats. UV-protected materials hold colour for the life of the install. The non-skid surface stays grippy in salt and freshwater alike. We've replaced installs that were 12–15 years old and still functional — owners typically replace for cosmetic updates or boat resale rather than wear failure.
Yes. SeaDek is removable using a heat gun + plastic scraper. The PSA softens with heat and lifts cleanly. Residual adhesive comes off with isopropyl alcohol or SeaDek's adhesive remover. If you're selling your boat or want to refresh the look, removal is straightforward — no damage to the underlying surface when done correctly.
Yes. SeaDek is closed-cell EVA foam — it doesn't absorb water and is unaffected by salt, fresh water, or chlorine. The material was originally developed for offshore fishing and tournament bass boats. Our service area is freshwater (Georgian Bay, Lake Simcoe, Muskoka), but the product is rated for any marine environment.
We come to your boat. Wherever it lives — at the marina, on a dry dock at the yard, or in your driveway — that's where we install. There's no truck-and-trailer hassle, no waiting for a slot in someone else's shop. We coordinate the cradle window with your yard and show up ready to work. Service area covers Collingwood, Meaford, Midland, Penetanguishene, Parry Sound, Barrie, Innisfil, Orillia, Beaverton, and across Muskoka.
The quote form at the top of the page is the fastest way in — three steps, the boat details that matter, and Kal calls back within one business day with honest options and a real price.
